Wireless Apple Carplay & Wired Android Auto 10.1 inch double din car stereo support Apple Carplay(wireless or via USB Cable) & Android Auto(via USB Cable), users can connect to the car system to control and sync the phones, access the music, GPS navigation, calls, messages and more functions on your phone through the big screen. And also can realize voice control. Specifications System Android 10.1 Screen size 10.1'' Memory 1GB (RAM)+16GB (ROM) Screen resolution 1024*600 Radio Band FM/RDS Power output 4*45W Steering wheel control Support Video output Support Factory setting keyword 8888 GPS Navigation & WiFi The android double din carplay built-in offline maps, you can also use the online maps/download the apps you need from the APP store with WiFi connected. Built in Bluetooth 4.0 The apple car play built-in in Bluetooth supports A2DP/hands-free call/autoloading phone books. FM Radio The FM radio is with 18 preset stations, you can save your favourite stations and listen to news, music and program at anytime. Reverse Image Input Double din car stereo with backup camera.When the vehicle is in reverse, the camera will turn on and the image will be displayed on the screen automatically, which makes your reverse more convenient and safer. Steering Wheel Control Car radio supports original car steering wheel control, you can control the functions you need by steering wheel.You can control the functions you need with your steering wheel easily.If your car need a canbus, the steering wheel control will not work. Input Mode Dual USB Interface: There are two USB interfaces on the car audio, one is for file transfer, and the other is for fast charging.Bluetooth Multifunctional Car Radio This car radio has a variety of convenient features that will make your journey more enjoyable and efficient Wiring and Installation "ACC": Connect the car ignition detection cable"B +": Connect it to the positive terminal of the car battery."GND": Ground / Iron / Negative battery."KEY1/ KEY2": Only one of the cables is selected for wiring depending on the compatibility of the model and the steering wheel control system. If you use two steering wheel controllers, you need to connect 2 cables."BACK": Connects to the rear camera input port."Lamp Control": Connect it to the small lamp in the front of the car to turn on the button backlight."ANT CONT": Connect the car radio antenna (no antenna, no wiring).Signal Input: Connect to the input port of the reversing camera."Audio / Video": See wiring diagram (Note: "AMP-CON" cable has no output voltage and must supply the amplifier or subwoofer via the car's ACC ignition cable). How to connect power cable: Red wire connects to ACC (ignition switch)Yellow wire connects to 12V battery positiveBlack wire connects to 12V battery negativeNote: the yellow wire must connect to constant power source, to keep setting memory."